Operation Guide 5192

To specify standard time or daylight saving time (DST) for a time zone

1. In the World Time Mode, use Dto select the city code for the time whose setting you want to change.

ξ Wait until the n Right Dial Hands complete their move to the time in the currently selected World Time City. You will not be able to perform step 2 of this procedure until the hands stop moving.

 

2. Hold down Afor about two seconds until the watch

 

beeps. This will cause the v Left Dial Hand to toggle

 

between DST (daylight saving time) and STD (standard

Hold down

time).

Afor two

ξ Note that you cannot switch between STD (standard

seconds

time)/DST (daylight saving/summer time) while UTC is

 

selected as the World Time City.

 

ξ Note that the STD (standard time)/DST (daylight

 

saving/summer time) setting affects only the currently

 

selected time zone. Other time zones are not affected.

E-40

To swap your Home City and World Time City

1.In the World Time Mode, use Dto select the World Time City you want.

ξ In this example, you would move the x Second Hand to NYC in order to select New York as the World Time City.

ξ Wait until the n Right Dial Hands complete their move to the time in the currently selected World Time City. You will not be able to perform step 2 of this procedure until the hands stop moving.

E-42

Using the Alarm

When the alarm is turned on, an alarm will sound for about 10 seconds each day when the time in the Timekeeping Mode reaches the preset alarm time. This is true even if the watch is not in the Timekeeping Mode.

Hand Functions

xSecond Hand: Indicates the current alarm ON/OFF

setting.

v Left Dial Hand: Points to ALM.

n Right Dial Hands: Indicate the current alarm time setting in 24-hour format.

E-44

Adjusting Home Positions

Swapping your Home City and World Time City

You can use the procedure below to swap your Home City and World Time City. This capability can come in handy when you frequently travel between two locations in different time zones.

The following example shows what happens when the Home City and World Time City are swapped while the Home City originally is TYO (Tokyo) and the World Time City is NYC (New York).

 

Home City

World Time City

 

Tokyo

New York

Before swapping

10:08 p.m.

9:08 a.m.

 

(Standard time)

(Daylight saving time)

 

New York

Tokyo

After swapping

9:08 a.m.

10:08 p.m.

 

(Daylight saving time)

(Standard time)

E-41

2. Hold down Bfor about three seconds until the watch beeps.

ξ This will make the World Time City (NYC in this example) your new Home City. At the same time, it will change the Home City you had selected prior to step 2 (TYO in this example) to your World Time City.

ξ After swapping the Home City and World Time City, the watch will stay in the World Time Mode. The

x Second Hand will point to your new World Time City (TYO in this example).

ξThe n Right Dial Hands will indicate the current time in your new World Time City.

E-43

To change the alarm time setting

1.Use Cto move the v Left Dial Hand to ALM.

ξThis indicates the Alarm Mode.

2.Use D(+) and B(–) to change the alarm time setting.

ξEach press of either button will move the n Right Dial Hands one minute.

ξHolding down Dor Bwill start high-speed hand movement in the applicable direction. To stop high-speed hand movement, press any button.

ξThe alarm always works based on the time kept in the Timekeeping Mode.

ξThe watch will return to the Timekeeping Mode automatically if you do not perform any operation in the Alarm Mode for about two or three minutes.

To turn the alarm on or off

In the Alarm Mode, press Ato toggle the alarm on and off. The x Second Hand will indicate the current ON/OFF setting.

To stop the alarm

Press any button.

E-45

To adjust home positions

Strong magnetism or impact can cause the hands and/or date of the watch to be off. If this happens, perform the applicable home position adjustment procedures in this section.

ξHand home position adjustment is not required if the time and day settings are correct.

Note

Any time after you enter the home position adjustment mode in step 1 of the following procedure, you can return to the Timekeeping Mode by pressing A. The watch also will return to the Timekeeping Mode automatically if you do not perform any operation for about two or three minutes in the home position adjustment mode. In either case, any adjustments you made before the watch returned to the Timekeeping Mode will be applied.

E-46



1.Hold down Cfor about two seconds until the x Second Hand stops and then starts moving again.

2.Hold down Dfor about three seconds.

ξThe x Second Hand will start to move when you first press D. Keep Ddepressed until the x Second Hand stops.

ξThe watch is now in the home position adjustment mode.

ξThe watch will exit the home adjustment mode automatically if you do not perform any operation for about two or three minutes.

ξFirst is x Second Hand home position adjustment.

ξIf the x Second Hand moves to 12 o’clock, it is in the correct home position. If it doesn’t, use Dto move it to 12 o’clock.

E-47

ξWhen adjusting a hand or the date home position, it is recommended that after you move to a proper home position, you press Bto move the setting back one step. Next, press Dagain to return it to the home position. This helps to ensure better home position adjustment accuracy.

ξEach press of Cin the home position adjustment mode will cycle through the adjustment settings as shown below.

x Second

z Hour/ c Minute/ b 24-hour

n Right Dial Hands

m Day

 

v Left Dial Hand

3.After confi rming that the x Second Hand is at the proper home position, press C. This will switch to z Hour Hand and c Minute Hand home position adjustment.

 

 

 

ξ The z Hour Hand and c Minute Hand are at their

 

 

 

proper home positions if they both move to 12 o’clock.

 

 

 

The b 24-hour Hand also will move along with

 

 

 

z Hour Hand movement, and cannot be adjusted



individually. If the hands are not positioned correctly,

use D(+) and B(–) to move them to their proper

 

 

 

 

 

 

home positions.

4.After confi rming that the z Hour Hand and c Minute Hand are in their correct home positions, press C. This will switch to n Right Dial Hands home position adjustment.

ξThe n Right Dial Hands are at their proper home positions if they both move to 24. If the hands are not positioned correctly, use D(+) and B(–) to move them to 24.

E-48

E-49