Casio 5288 Timekeeping, Configuring Home City Settings, Adjusting the Digital Time and Date Settings, DST, OFF, 24H, Note, Note, Screen, Do this:, Scrolling, Alarm Mode

Operation Guide 5288

Selecting a Mode

ξPress C to cycle between the modes as shown below.

ξIn any mode (except when a setting mode, with fl ashing digits is on the display), press B to illuminate the display.

Timekeeping Mode	World Time Mode	Countdown Timer Mode	Stopwatch Mode	Alarm Mode	Hand Setting Mode
C	C	C	C		C
				C
E-10					E-11

General Functions (All Modes)

The functions and operations described in this section can be used in all of the modes.

Auto Return Features

ξThe watch returns to the Timekeeping Mode automatically if you do not perform any button operation for two or three minutes in the Alarm Mode.

ξIf you leave a setting mode with fl ashing digits on the display for two or three minutes without performing any operation, the watch exits the setting mode automatically.

Initial Screens

When you enter the World Time Mode or Alarm Mode, the data you were viewing when you last exited the mode appears first.

Scrolling

The B and D buttons are used on the setting mode to scroll through data on the display. In most cases, holding down these buttons during a scroll operation scrolls through the data at high speed.

Timekeeping

	Minutes	Use the Timekeeping Mode to set and view the current
Hour		time and date.
		ξ Each press of		D cycles the digital display contents as
		shown below.
		Day of the Week		Month-Day		Hour : Minutes		Seconds
			D		D		D
					PM indicator
					D
	Day of week

E-12E-13

Configuring Home City Settings			3. Press D (East) and B (West) to select the city code
			you want to use as your Home City.
There are two Home City settings: actually selecting the Home City, and selecting
			ξ Keep pressing D or B until the city code you want
either standard time or daylight saving time (DST).
			to select as your Home City appears on the display.
	To configure Home City settings		4. After the setting is the way you want, press A to
	1. In the Timekeeping Mode, hold down A for about two		return to the Timekeeping Mode.
	seconds until the seconds start to flash. This is the		Note
	setting mode.	City Code
			ξ After you specify a city code, the watch will use UTC*
	ξ The watch will exit the setting mode automatically if
			offsets in the World Time Mode to calculate the current
	you do not perform any operation for about two or
			time for other time zones based on the current time in
	three minutes.
			your Home City.
	2. Press C twice to move the flashing to the city code.
Seconds			* Coordinated Universal Time, the world-wide scientifi c
	ξ For details about city codes, see the “City Code		standard of timekeeping.
	Table” at the back of this manual.		The reference point for UTC is Greenwich, England.
E-14			E-15

To change the Daylight Saving Time (summer time) setting

1. In the Timekeeping Mode, hold down A for about two

DST indicator seconds until the seconds start to flash. This is the setting mode.

2. Press C to display the DST setting mode.

3. Press D to toggle between Daylight Saving Time (On) and Standard Time (OFF).

4. After the setting is the way you want, press A to return to the Timekeeping Mode.

ξThe DST indicator appears to indicate that Daylight Saving Time is turned on.

E-16

Adjusting the Digital Time and Date Settings

Use the procedure below to adjust the digital time and date settings.

Note

ξAfter adjusting the digital time and date setting, be sure to adjust the analog hands so the settings match.

ξSee “Adjusting the Analog Hand Setting” (page E-36).

To configure the digital time and date settings

1.In the Timekeeping Mode, hold down A for about two seconds until the seconds start to flash. This is the setting mode.

Seconds

E-17

2. Press C to move the flashing in the sequence shown below to select the other settings.

C

C

C

C

Seconds

DST

Home City Code

Hour

Minutes

C

C

Illumination Duration

Day

Month

Year

12/24-Hour Format

C

C

C

C

ξ The following steps explain how to confi gure timekeeping settings only.

3.When the timekeeping setting you want to change is flashing, use D and/or B to change it as described below.

Screen	To do this:	Do this:
	Reset the seconds to 00	Press D.
	Toggle between Daylight Saving Time (ON)	Press D.
	and Standard Time (OFF)
	Change the city code	Use D (East) and B (West).
	Change the hour or minute	Use D (+) and B (–).
	Toggle between 12-hour (12H) and 24-hour	Press D.
	(24H) timekeeping
	Change the year, month, or day	Use D (+) and B (–).

4. Press A to exit the setting mode.

E-18 E-19