Playing Back Built-in Songs

TONE/SETTING SONG ￿/￿

LR

IMPORTANT!

After you select a built-in song, it can take a number of seconds for the song data to be loaded. While the data is being loaded, the keyboard keys and button operations will be disabled. Selecting a song while playing something on the keyboard will cause sound output of the keyboard notes to stop.

Playing Back All of the Built-in Songs

Your digital piano comes with a Music Library of 60 built-in tunes. You can play all 60 tunes in sequence, from beginning to end.

1. While holding down the TONE/SETTING button, press the SONG X/„ button.

This will start repeat demo playback of the built-in songs in sequence, from 01 through 60.

You can play along with a song on the keyboard as it is playing. The tone assigned to the keyboard is the one that is preset for the song that is playing.

You can select a specific song during demo playback. For details, see step 2 under “Playing Back a Specific Music Library Song”.

2.Press the SONG X/„ button again to stop built-in song play.

NOTE

The tune selection and playback stop operations described above are the only operations that are possible during demo tune play.

Built-in tune MIDI data is not output during built-in song play.

Playing Back a Specific Music Library Song

1. Find the song number of the song you want to play in the song list on page A-1.

2. To change to another song, hold down the TONE/SETTING button as you use the SONG SELECT keys to specify a song number.

Each press of the + or – key raises or lowers the song number by 1.

You can use the value input keys (0 to 9) to enter a specific song number. Be sure to input all two-digits.

Example: To select song 08, enter 0 and then 8.

IMPORTANT!

Be sure to allow a bit of time between + and – key operations. Performing a series of + and – key operations too quickly can cause some of the operations to be skipped.

E-12