Basic Operations

MAIN VOLUME

TONE

POWER/MODE

Number buttons

This section provides information on performing basic keyboard operations.

Playing the Keyboard

To play the keyboard

1. Set the POWER/MODE switch to NORMAL.

2. Use the MAIN VOLUME buttons to lower the keyboard volume.

•It’s always a good idea to set the keyboard volume at a relatively low level before playing.

•Pressing [￿] or [￿] causes the current volume setting to appear on the display. Press [￿] or [￿] again to change the setting.

3.Play something on the keyboard.

Selecting a Tone

This keyboard comes with 100 built-in tones. Use the following procedure to select the tone you want to use.

To select a tone

1. Find the tone you want to use in the keyboard’s tone list and note its tone number.

2. Press the TONE button.

Appears when TONE button is pressed

3. Use the number buttons to input the two digit tone number for the tone you want to select.

Example: To select “26 WOOD BASS”, input 2 and then

6.

•Now notes played on the keyboard will be played using an acoustical wood bass sound.

❚NOTE

•Always input both digits for the tone number, including a lead- ing zero (if any). If you input one digit and stop, the display will automatically clear your input after a few seconds.

•You can also increment the displayed tone number by press- ing [+] and decrement it by pressing [–].

•The names of tone numbers 60 through 89 are not marked on the keyboard console. See the “Tone List” (page A-1) for de- tails.

•Sound effect tones such as 77 VEHICLE sound best when you keep a keyboard key depressed.

E-16

625A-E-018A

CTK481_E08_17.p65

Page 16

02.8.26, 17:30

Adobe PageMaker 6.5J/PPC