Symptom | Possible Cause | Recommended Action |
The printing is | Improper alignment of | Use the positioning guide when |
not positioned | the disc when it is placed | aligning the disc. (See the DISC |
correctly on the | in the printer. | TITLE PRINTER Application |
disc. |
| User's Guide) |
The disc stops | The power cord plug or | Correctly connect the power |
part way | the AC adaptor is not | cord and the AC adaptor. |
through | plugged in as far as it will |
|
printing. | go. |
|
| The printer is malfunc- | If you cannot easily remove the |
| tioning. | disc from between the print |
|
| head and roller, refer to the |
|
| "General Guide" explanation on |
|
| page 17. |
|
|
|
Printing will not | The disc is not positioned | Remove the disc and then re- |
start. | correctly in the printer. | insert it straight into the left side |
|
| of the slit along the top of the |
|
| printer. (See the DISC TITLE |
|
| PRINTER Application User's |
|
| Guide) |
|
|
|
I can't remove | The printer is | Refer to the "General Guide" |
a disc from the | malfunctioning. | explanation on page 17. |
printer. |
|
|
|
|
|
– 26 –