Operation Guide DQR-300U

Switching between Main Unit and Sub-unit Temperature Data

•Press the SELECT button (B) to toggle the display between the main unit (INDOOR) temperature and the sub- unit (OUTDOOR) temperature.

Main unit temperature: INDOOR indicator displayed

Sub-unit temperature: OUTDOOR indicator displayed

•The display does not change to the sub-unit (OUTDOOR) temperature if no data has been received from the sub- unit yet.

•Holding down SELECT button (B) for about two seconds causes the display to continually toggle between the main unit and sub-unit temperature at five-second intervals.

 

 

Main unit

 

 

 

Sub-unit

INDOOR

 

 

 

 

 

 

 

 

 

OUTDOOR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SELECT button (B)

High Temperature and Low Temperature Memory

•The following data is stored in memory automatically. Main unit high temperature and low temperature Sub-unit high temperature and low temperature

Current temperature and humidity

MAX/MIN TEMP. button (7)

Main unit high temperature and low temperature

Sub-unit high temperature and low temperature

•To clear the high temperature and low temperature data memory, press the CLEAR button (9). New data starts to be stored after memory is cleared.

CLEAR button (9)

HYGROMETER FUNCTIONS

Both the main unit and the sub-unit are equipped with their own humidity sensors. Humidity data measured by the sub-unit is sent by wireless transfer to the main unit. You can toggle the main unit display between the main unit humidity reading and the sub-unit humidity reading. This makes it possible to view both the indoor and outdoor humidity on the main unit display.

Humidity Measurements

•Both the main unit and the sub-unit take humidity measurements every 16 seconds.

•The humidity display shows “LO” for humidity below 10% and “HI” for humidity above 90%.

Switching between Main Unit and Sub-unit Humidity Data

•Press the SELECT button (B) to toggle the display between the main unit (INDOOR) humidity and the sub-unit (OUTDOOR) humidity .

Main unit humidity: INDOOR indicator displayed

Sub-unit humidity: OUTDOOR indicator displayed

•The display does not change to the sub-unit (OUTDOOR) humidity if no data has been received from the sub-unit yet.

•Holding down SELECT button (B) for about two seconds causes the display to continually toggle between the main unit and sub-unit humidity at five-second intervals.

 

 

Main unit

 

 

 

Sub-unit

INDOOR

 

 

 

 

 

 

 

 

 

OUTDOOR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SELECT button (B)

High Humidity and Low Humidity Memory

•The following data is stored in memory automatically. Main unit high humidity and low humidity

Sub-unit high humidity and low humidity

Current temperature and humidity

MAX/MIN HUMIDITY button (8)

Main unit high humidity and low humidity

Sub-unit high humidity and low humidity

5