Deleting Images
If memory becomes full, you can delete images you no longer need in order to free up storage and record more images.
IMPORTANT!
•Remember that a file (image) delete operation cannot be undone.
•For information about images recorded using continuous shutter (CS), see page 97.
To delete a single file
1.Press [p] (PLAY) to enter the PLAY mode and then press [2] ( 
).
2.Use [4] and [6] to scroll through the files until the one you want to delete is displayed.
3.Use [8] and [2] to select “Delete” and then press [SET].
•To delete other files, repeat steps 2 and 3.
•To exit the delete operation, press [MENU].
•If a CS group (page 95) is displayed when you perform the above procedure, all of the images in the currently display CS group will be deleted.
To delete all files
1.Press [p] (PLAY) to enter the PLAY mode and then press [2] ( 
).
2.Use [8] and [2] to select “Delete All Files” and then press [SET].
3.Use [8] and [2] to select “Yes” and then press [SET] to delete all files. This will cause the message “There are no files” to appear.
29 | Quick Start Basics |
|