Tips for Best Face Detection Results

•The camera performs center focus if it cannot detect a face.

•Always make sure that Auto Focus (AF) is selected as the focus mode when shooting with face detection.

•Detection of the following types of faces is not supported.

–A face that is obstructed by hair, sunglasses, a hat, etc., or a face in dark shade

–A profile or a face that is at an angle

–A face that is very far away and small, or very close and large

–A face in an area that is very dark

–A face of a pet or some other non-human subject

IMPORTANT!

•Face detection cannot be used in combination with any of the following features.

–Lag Correction (when shooting single shots)

–Some BEST SHOT scenes (Move Out CS, Move In CS, Multi-motion Image, For YouTube, Prerecord (Movie))

–Movie Mode

–High Speed CS with Prerecord CS

•Focus mode selection on the menu is disabled while face detection is turned on.

Shooting with Continuous Auto Focus (Continuous AF)

Procedure

[r] (REC) * [MENU] * REC Tab * Continuous AF

When shooting a snapshot while “On” is selected for Continuous AF, Auto Focus is performed and focusing is continually updated until you half-press the shutter button. When “Q Auto Focus” or “´ Macro” is selected for the “Focus” setting, Continous AF is performed during HD and STD movie recording, regardless of the current “Continuous AF” setting.

•Before you half-press the shutter button, the camera focuses at the center of the screen. If “— Free” is selected for the “AF Area” setting (page 84) when you half- press the shutter button, focusing is performed for the area specified by “— Free”. If “Face Detection” is turned on, focusing is performed in the area where a face is detected.

86

Advanced Settings