| Problem | Possible Cause and Recommended Action |
Other |
| |
| The wrong date | The date and time setting is off. Set the correct date and time |
| and time are | (page 144). |
| displayed, or the |
|
| wrong date and |
|
| time are being |
|
| stored along with |
|
| image data. |
|
|
|
|
| The messages on | The wrong display language is selected. Change the display |
| the display are in | language setting (page 145). |
| the wrong |
|
| language. |
|
|
|
|
| Images cannot be | 1)The USB cable may not be connected securely. Check all |
| transferred over a | connections. |
| USB connection. | 2)The wrong USB communication protocol is selected. Select |
|
| the correct USB communication protocol in accordance with |
|
| the type of device you are connecting (pages 122, 131). |
|
| 3)If the camera is not turned on, turn it on. |
|
| 4)Your computer may not be able to recognize the camera if |
|
| you connect via a USB hub. Always connect directly to the |
|
| computer’s USB port. |
|
|
|
| Language selection | 1)You did not configure initial settings after purchasing the |
| screen appears | camera or the camera may have been left with a dead |
| when the camera is | battery. Check the camera setup (pages 17, 145). |
| turned on. | 2)There may be a problem with the camera’s memory data. If |
|
| this is the case, perform the reset operation to initialize the |
|
| camera’s setup (page 148). After that, configure each setting. |
|
| If the language selection screen does not |
|
| turn the camera on, it means that the camera’s memory |
|
| management data has been restored. |
|
| If the same message appears after you turn power back on, |
|
| contact your retailer or a CASIO authorized service center. |
|
|
|
170 | Appendix |
|