Time Stamping Snapshots (Timestamp)
Procedure
[SET] * MENU * “Set Up” Tab * Timestamp
You can configure the camera to stamp the recording date only, or date and time in the lower right corner of each snapshot.
•Once date and time information is stamped into a snapshot, it cannot be edited or deleted.
Example: July, 10, 2015, 1:25 p.m.
Date | 2015/7/10 |
Date&Time | 2015/7/10 1:25pm |
Off | No stamping of date and/or time |
|
|
•Even if you do not stamp the date and/or time with Timestamp, you can do so later using the DPOF function or some printing application (page 82).
•Digital zoom is disabled while time stamping is turned on.
•Time stamping is disabled when certain BEST SHOT scenes are being used.
Setting the Camera’s Clock (Adjust)
Procedure
[SET] * MENU * “Set Up” Tab * Adjust
[8] [2] | Change the setting at the cursor location |
[4] [6] | Move the cursor between settings |
[0] (Movie) | Toggles between |
|
|
When the date and time settings are what you want, press [SET] to apply them.
•You can specify a date from 2001 to 2049.
•Be sure to select your Home City (page 99) before setting the time and date. If you set the time and date while the wrong city is selected for your Home City, the times and dates of all of the World Time cities (page 99) will be wrong.
100 | Other Settings (Set Up) |
|