Casio EX-N5, EX-N50, EX-Z42 manual 123

Problem	Possible Cause and Recommended Action
Language selection	1)You did not configure initial settings after purchasing the
screen appears	camera or the camera may have been left with a dead
when the camera is	battery. Check the camera setup (pages 18, 101).
turned on.	2)There may be a problem with the camera’s memory data. If
	this is the case, perform the reset operation to initialize the
	camera’s setup (page 104). After that, configure each setting.
	If the language selection screen does not re-appear when you
	turn the camera on, it means that the camera’s memory
	management data has been restored.
	If the same message appears after you turn power back on,
	contact your retailer or a CASIO authorized service center.
There are various	The monitor screen shows indicators and other information
indicators and	about shooting conditions and the image you are recording. You
values on the	can use [8] (DISP) to select what information you want to
monitor screen.	include on the display (page 11).
The time and date	Load the camera’s battery and reconfigure the time and date
settings configured	settings (page 18). Do not remove the battery from the camera
the first time after	for at least 24 hours after configuring time and date settings.
purchasing the	After that, the settings will not be reset if you remove the
camera are reset to	battery.
their factory	• If the time and date are reset to their factory default settings
defaults when	when you remove the battery after it has been loaded for
remove the	more than 24 hours, it could mean that the camera’s setting
camera’s battery.	memory is defective. Contact your retailer or a CASIO
	authorized service center.
Buttons are not	With large capacity memory cards there is a delay after the
responsive right	power has been turned on before the buttons become
after the power has	responsive.
been turned on.

123 Appendix