.To charge using a USB connection to a computer

The camera’s battery is charged whenever the camera is connected directly to a computer with the USB cable.

Depending on the setup of your computer, you may not be able to charge the battery over a USB connection. If this happens, use of the USB-AC adaptor that comes with the camera is recommended.

IMPORTANT!

The first time you connect the camera to your computer with the USB cable, an error message may appear on your computer. If this happens, disconnect and then reconnect the USB cable.

1.Press [p] (Power) to turn off the camera.

2.Press the back of the monitor screen panel so the panel moves towards you, and open the frame (page 13).

3. Hook your nail into the groove of the USB

USB port cover

port cover and pull the cover in the

 

direction indicated by the arrow to open

 

it.

 

B

20

Quick Start Basics