PRINTING IMAGES

12.On the camera’s monitor screen, use [￿] and [￿] to select “Print”, and then press [SET].

•This starts printing and displays the message

“Busy.... Please wait...” on the monitor screen. The message will disappear after a short while, even though printing is still being performed. Pressing any of the camera’s buttons while printing is in progress will cause the message to reappear.

•The print menu will appear when printing is complete.

•If you selected “1 Image” in step 11, you can select another image for printing and then repeat this step to print.

13.After printing is complete, turn off the camera and then disconnect the USB cable from the camera.

Date Printing

Any one of the procedures described below can be used to include the recording date in image prints. Correct date printing requires that the current date be set on the camera before the image is recorded.

•Specifying date printing with DPOF settings (page 184)

–Some printers may have settings that disable time stamp and/or DPOF printing. See the user documentation that comes with your printer for details about how to enable these features.

–Note that some professional print services do not support DPOF printing. Check with your service before ordering prints.

•Specifying date printing with the Photohands software that comes with the camera

–See page 23 of the Photohands User’s Guide for details. The Photohands User’s Guide is provided as a PDF file on the CD-ROM that comes bundled with your camera.

•Specifying date printing when having printing done by a print service

–Some print services do not support date printing. Check with your service for more information.

190