12.Use [S] and [T] to select “Print” and then

press [SET].

Printing will start and the message “Busy... Please wait...” will appear on the monitor screen. The message will disappear after a short while, even though printing is still being performed. Pressing any camera button will cause the printing status message to re-appear.

The print menu screen will re-appear when printing is complete.

•If you selected “1 Image” in step 11, you can repeat the procedure from step 11 to print other images, if you want.

13.After printing is complete, turn off the camera and then disconnect the USB cable from the camera.

Using DPOF to Specify Images to be Printed and the Number of Copies

DPOF (Digital Print Order Format) lets you specify which images you want to print, the number of

copies, and whether date stamping is turned on or

off. The settings you configure are recorded on the memory card. After configuring settings you can

use the memory card to print on a home printer that supports DPOF or take the memory card to a professional print service. With DPOF, you can configure settings while viewing the actual images on the camera’s monitor screen, so there is no need to recall hard-to-remember files names, etc.

IMPORTANT!

•Some printers may ignore time stamp settings or may not support DPOF at all. Check the user documentation that comes with your printer for details.

•Certain print service providers may not support DPOF or may support different printing protocols. In this case, you will need to perform printing in accordance with the instructions provided by the print service you are using.

177

PRINTING