APPENDIX

 

Symptom

 

Possible Cause

 

Action

 

 

 

 

 

All buttons and switches

Circuit problem caused by electrostatic charge,

Remove the batteries from the camera, reinsert

 

are disabled.

impact, etc. while the camera was connected to

them, and then try again.

 

 

another device.

 

 

 

 

 

 

Other

Monitor screen is off.

USB communication is in progress.

After confirming that the computer is not

 

 

 

cable.

 

 

 

 

accessing camera memory, disconnect the USB

 

 

 

 

 

 

 

Cannot transfer files over a

1)

USB cable is not connected securely.

1)

Check all connections.

 

USB connection.

2)

USB driver is not installed.

2)

Install the USB driver on your computer (page

 

 

 

 

 

193).

 

 

3)

Camera is turned off.

3)

Turn on the camera.

 

 

 

 

 

 

234