OTHER RECORDING FUNCTIONS
Using Manual Focus
With the Manual Focus mode, you can adjust the focus of an image manually. The following shows focus range in the Manual Focus mode.
Optical Zoom Factor | Approximate Focus Range |
|
|
1X | 10cm (3.9˝) to infinity (∞) |
|
|
3X | 40cm (15.7˝) to infinity (∞) |
|
|
•Using optical zoom causes the above range to change.
1.Press [] (
) to cycle through the focus mode settings
until “
” is shown as the focus mode indicator.
• At this point, a
boundary also appears
on the display,Boundary indicating the part of the
image that will be used for manual focus.
2.While watching the
image on the monitor screen, use [] and [] to focus.
| Manual focus position | |
|
|
|
To do this: | Do this: |
|
Focus in on the subject | Press []. |
|
Focus out on the subject | Press []. |
|
•Pressing [] or [] causes the area inside of the boundary displayed in step 1 to fill the monitor screen momentarily to aid in focus. The normal image will reappear a short while later.
3.Press the shutter button to record the image.
85