Adjusting Image Brightness
Use the following procedure to adjust the brightness of snapshots.
1.In the PLAY mode, use [W] and [X] to scroll through images and display the one whose brightness you want to adjust.
2.Press [MENU].
3.Select the “PLAY” tab, select “Brightness”, and then press [X].
•Note that the above step is possible only when there is a snapshot displayed on the monitor screen.
4.Use [S] and [T] to select the setting you want, and then press [SET].
To get this: | Select this setting: |
|
|
+2
Brighter
+1
0
Darker
•To cancel the brightness adjustment operation, press [W] or [MENU].
IMPORTANT!
•Adjusting the brightness of an image creates a new image with the new brightness level. The original image also remains in memory.
•When you display a brightness adjusted image on the camera’s monitor screen, the date and time indicates when the image was originally recorded, not when the brightness was adjusted.
169
EDITING IMAGES