Reducing the Effects of
Underexposure
You can use the following procedure to reduce underexposure only, while maintaining the bright areas of an image.
1.In the PLAY mode, use [W] and [X] to select the image you want to correct.
2.Press [MENU].
3.On the “PLAY” tab, select “Dynamic Range”, and then press [X].
4.Use [S] and [T] to select the setting you want and then press [SET].
IMPORTANT!
•Performing Dynamic Range correction on an image causes the new (corrected) version to be stored as a separate file.
•When you display a corrected image on the camera’s monitor screen, the date and time indicates when the image was originally recorded, not when the image was corrected.
When you want to do this:
Select this setting:
Apply Dynamic Range to a greater
extent than “Expand +1”
Expand +2
Reduce underexposure | Expand +1 |
170
EDITING IMAGES