.To connect the camera to your computer and save files
1.Turn on the camera and press [MENU].
2.On the “Set Up” tab, select “USB” and then press [6].
3.Use [8] and [2] to select “Mass Storage”, and then press [SET].
4. Turn off the camera and | USB port | |
then use the USB cable | USB cable | |
that comes with the |
| |
camera to connect it to | Large connector | |
your computer. |
| |
• The camera does not |
| |
| draw power over the USB |
|
| cable. Make sure the | Small connector |
| camera’s battery is | |
|
| |
| sufficiently charged | USB/AV port |
| before connecting. | |
|
| |
• | Make sure that you insert |
|
| the cable connector into | Making sure that the 6 mark on the camera is |
| the USB/AV port until you | aligned with the 4 mark of the USB cable |
| feel it click securely into | connector, connect the cable to the camera. |
| place. Failure to insert the |
|
| connector fully can result |
|
| in poor communication or |
|
| malfunction. |
|
• | Note that even while the connector is fully inserted, you still | |
| will be able to see the metal part of the connector as shown | |
| in the illustration. |
|
•When connecting the USB cable to a USB port, make sure you align the connector correctly with the port.
5.Turn on the camera.
105Using the Camera with a Computer