
.Using the easy Menu
The easy menu contains flash,
While the camera is in the easy mode, all the other settings (besides Flash, Self- timer, Image Size, and easy Mode) on the REC tab menu (page 150) and Quality tab menu (page 151) are fixed at preset optimum values. Any settings you configured on these tabs are not used in the easy mode.
IMPORTANT!
•To use the Set Up tab menu (page 151), you need to exit the easy mode. To do this, select the “easy Mode” item in step 2 of the following procedure, and then select l in step 3. After that, you can use the Setup tab menu as you normally do.
1.Press [MENU].
The easy menu displays larger text than standard menus.
2.Use [8] and [2] to select the menu item you want, and then press [SET].
3.Use [8] and [2] to select the setting you want, and then press [SET].
Menu Item: | Available Settings: |
Flash | > (Auto Flash)* / < (Flash On) / ? (Flash Off) |
|
|
• | |
|
|
Image Size | (* / $ / ! |
|
|
easy Mode | k / l* |
|
|
Exit Menu | Exit the easy menu |
|
|
•An asterisk (*) indicates reset default settings.
•See the following for details.
–Flash (page 26)
–
–Image Size (page 24)
•The following are the settings you can select for “easy Mode”.
To do this: | Select this setting: | |
Stay in the easy mode, without switching to another | k | |
recording type | ||
| ||
|
| |
Switch from the easy mode to a standard recording type | l | |
|
|
•
B | 41 | Snapshot Tutorial |
|