| Problem | Possible Cause and Recommended Action |
| Images cannot be | 1)Note that you cannot edit the following types of snapshots. |
| edited (with Layout | • Snapshots created using MOTION PRINT |
| Print, resizing, | • Movies |
| trimming, keystone | • Snapshots recorded with another camera |
| correction, color | 2)With keystone correction and color restoration, editing is not |
| restoration, date/ | possible if the camera cannot find a shape to edit within the |
| time editing, | frame on the monitor screen (pages 88, 89). |
| rotation). |
|
Other |
| |
| The wrong date | The date and time setting is off. Set the correct date and time |
| and time are | (page 125). |
| displayed. |
|
|
|
|
| The messages on | The wrong display language is selected. Change the display |
| the display are in | language setting (page 126). |
| the wrong |
|
| language. |
|
| Images cannot be | 1)The USB cable may not be connected securely. Check all |
| transferred over a | connections. |
| USB connection. | 2)The wrong USB communication protocol is selected. Select |
|
| the correct USB communication protocol in accordance with |
|
| the type of device you are connecting (pages 104, 113). |
|
| 3)If the camera is not turned on, turn it on. |
|
|
|
| Language selection | 1)You did not configure initial settings after purchasing the |
| screen appears | camera or the battery may have been left with a dead battery. |
| when the camera is | Check the camera setup (pages 13, 126). |
| turned on. | 2)There may be a problem with the camera’s memory data. If |
|
| this is the case, perform the reset operation to initialize the |
|
| camera’s setup (page 129). After that, configure each setting. |
|
| If the language selection screen does not |
|
| turn the camera on, it means that the camera’s memory |
|
| management data has been restored. |
|
| If the same message appears after you turn power back on, |
|
| contact your retailer or a CASIO authorized service center. |
|
|
|
154 | Appendix |
|