Other Settings (Set Up)

This section explains menu items that you can use to configure settings and perform other operations in both the REC mode and PLAY mode.

For information about menu operations, see page 64.

Turning off Eye-Fi Card Communication (Eye-Fi)

Procedure

[MENU] * Set Up Tab * Eye-Fi

Select “Off” to disable Eye-Fi card communication (page 137).

Configuring Camera Sound Settings (Sounds)

Procedure

[MENU] * Set Up Tab * Sounds

 

Startup

 

 

Half Shutter

Specifies the startup sound.

 

 

 

Sound 1 - 5: Built-in sounds (1 through 5)

 

Shutter

 

Off: Sound off

 

Operation

 

 

 

Operation

Specifies the sound volume. This setting is also used as the

 

=

 

audio level during video output (page 93).

 

 

 

 

 

 

Specifies the volume of movie and Audio Snapshot audio

 

=

Play

output. This volume setting is not used during video output

 

 

 

(from the USB/AV port).

 

 

 

 

• Setting a volume level of 0 mutes output.

Configuring a Startup Image (Startup)

Procedure

[MENU] * Set Up Tab * Startup

Display the image you want to use as your startup image and then select “On”.

•The startup image does not appear when you turn on the camera by pressing [p] (PLAY).

•You can specify a snapshot you recorded as the startup image, or you can use the special startup image provided in the camera’s built-in memory.

•If you select an audio snapshot as the startup image, the audio will not play at startup.

•Formatting built-in memory (page 149) will delete the current startup image setting.

142

Other Settings (Set Up)