APPENDIX

Other

Symptom

 

Possible Cause

 

Action

All buttons and switches

Circuit problem caused by electrostatic charge,

Remove the battery from the camera, reinsert it,

are disabled.

impact, etc. while the camera was connected to

and then try again.

 

another device.

 

 

 

 

 

Monitor screen is off.

USB communication is in progress.

After confirming that the computer is not

 

 

 

accessing camera memory, disconnect the USB

 

 

 

cable.

 

 

 

 

 

Cannot transfer files over a

1)

USB cable is not connected securely.

1)

Check all connections.

USB connection.

2)

USB driver is not installed.

2)

Install the USB driver on your computer (page

 

 

 

 

189).

 

3)

Camera is turned off.

3)

Turn on the camera.

 

 

 

 

 

Display language setting

1)

Camera’s display language, Home city, date

1)

Check the settings (page 46).

screen appears when the

 

style, date and time, and other settings have

 

 

camera is turned on.

 

not been configured.

 

 

 

2)

A problem with the camera’s built-in memory

2)

Perform the reset operation to initialize the

 

 

management area.

 

camera’s setup (page 123). After that, configure

 

 

 

 

each setting. If the language selection screen

 

 

 

 

does not re-appear when you turn the camera

 

 

 

 

on, it means that the camera’s built-in memory

 

 

 

 

management area has been restored. If the

 

 

 

 

same message appears after you turn power

 

 

 

 

back on, contact your retailer or a CASIO

 

 

 

 

service center.

 

 

 

 

 

230