OTHER RECORDING FUNCTIONS

Using Manual Focus

With the Manual Focus mode, you can adjust the focus of an image manually. The following shows focus range in the Manual Focus mode.

Optical Zoom Factor

Approximate Focus Range

1X

10cm (3.9˝) to infinity (∞)

 

 

3X

60cm (23.6˝) to infinity (∞)

 

 

•Using optical zoom causes the above range to change.

1.In the REC mode, press [MENU].

2.Select the “REC” tab, select “Focus”, and then press [￿].

3.Use [￿] and [￿] to

select “ ”, and then press [SET].

•At this point, a boundary also appears on the display, indicating the part of the image that will be used

for manual focus.

Boundary

4.Press [SET].

5.While watching the

image on the monitor screen, use [￿] and [￿] to focus.

 

Manual focus position

 

 

 

To do this:

Do this:

 

Focus in on the subject

Press [￿].

 

 

 

 

Focus out on the subject

Press [￿].

 

 

 

 

•Pressing [￿] or [￿] causes the area inside of the boundary displayed in step 1 to fill the monitor screen momentarily to aid in focus. The normal image will reappear a short while later.

•If you do not adjust the focus of the enlarged image, it will return automatically to step 3. If this happens and you still want to adjust the focus, press [SET] to display the enlarged image again.

80