APPENDIX

3.Press the camera’s power button to turn it on, and then press its [MENU] button.

4.Select the “Set Up” tab, select “USB”, and then press [￿].

5.Use [￿] and [￿] to select “Mass Storage (USB

DIRECT-PRINT)”, and then press [SET].

6.Turn off the camera.

7.Place the camera onto the USB cradle.

•Do not place the camera onto the USB cradle while it is turned on.

[USB] button

[USB] lamp

8.Press the USB cradle’s [USB] button.

•Pressing the [USB] button enters the USB mode, which causes the USB cradle’s [USB] lamp to light green.

•Your Macintosh will see the camera’s file memory as a drive.

•The appearance of the drive icon depends on the Mac OS version you are using.

•Your Macintosh will see the camera’s file memory as a drive whenever you establish a USB connection between the camera and your Macintosh.

9.Perform the procedure in the camera user’s guide to view the images on your computer.

10.To terminate the USB connection, drag the drive icon that represents the camera to Trash.

11.Press the USB cradle’s [USB] button. After making sure the [USB] lamp is not lit, remove the camera from the USB cradle.

245