Making sure that the 4 mark on the camera is aligned with the 6 mark of the USB cable connector, connect the cable to the camera.
Small connector
USB port
USB/AV port

4. Turn off the camera

USB cable

and then use the USB

Large connector

cable that comes with

 

the camera to connect

 

it to your computer.

 

• The camera does not draw power over the

USB cable. Make sure the camera’s battery is

sufficiently charged before connecting.

• Make sure that you

insert the cable connector into the USB/

AV port until you feel it click securely into place. Failure to insert the connector fully can result in poor communication or malfunction.

• Note that even while the connector is fully inserted, you still will be able to see the metal part of the connector as shown in the illustration.

•When connecting the USB cable to a USB port, make sure you align the connector correctly with the port.

•Your computer may not be able to recognize the camera if you connect via a USB hub. Always connect directly to the computer’s USB port.

5.Turn on the camera.

6.Windows 7 / Windows Vista users: Click “Start” and then “Computer”.

Windows XP users: Click “Start” and then “My Computer”.

Windows 2000 users: Doubleclick “My Computer”.

7.Double-click “Removable Disk”.

•Your computer recognizes the memory card loaded in the camera (or built-in memory if there is no card) as a removable disk.

124Using the Camera with a Computer