
Snapshot Tutorial
Using the Control Panel
The Control Panel can be used to configure camera settings.
1.In the REC mode, press [SET].
This will select one of the Control Panel icons and display its settings.
[8] [2] [4] [6] | Available settings Control Panel | |
| 1 | |
| 2 | |
| 3 | |
| 4 | |
| 5 | |
| 6 | |
| 7 | |
[SET] | 8 | |
9 | ||
|
2.Use [8] and [2] to select the setting you want to change.
1Image size/Quality* (pages 33, 77) | 7Face |
2Flash (page 36) | (pages 45, 79, 80) |
3Focus (page 38) | 8EV shift (page 46) |
4AF Area (page 41) | 9Date/Time (page 47) |
5ISO sensitivity (page 43) |
|
|
*Snapshot image quality cannot be changed using the Control Panel.
3.Use [4] and [6] to change the setting.
4.If you want to configure another setting, repeat steps 2 and 3.
5.After all of the settings are the way you want, press [SET]. This will apply the settings and return to the REC mode.
NOTE
•You also can configure settings other than those listed above (page 63).
•The Control Panel cannot be displayed when certain BEST SHOT scenes are being used.
32 | Snapshot Tutorial |
|