Other Useful Recording Functions
The following functions are also available in the REC mode to help make your digital image more efficient and enjoyable.
•Assign functions to the [W] and [X] keys
•Display an
•Review an image you just recorded
•Register initial power up settings
•Reset settings
Using Key Customize to Assign Functions [W] and [X]
Key Customize lets you assign any one of the five functions listed below to the [W] and [X] keys. Once you do, you will be able to use the assigned functions while shooting snapshots or movies, without going through the menus. For details about each of the functions, see the referenced page numbers.
When this function is | You can use [W] and [X] to do | |
assigned: | this: | |
Metering (page 130) | Change the metering setting | |
|
| |
EV Shift (page 125) | Perform EV shifting for | |
exposure compensation | ||
| ||
|
| |
White Balance (page 126) | Change the white balance | |
setting | ||
| ||
|
|
When this function is | You can use [W] and [X] to do | |
assigned: | this: | |
ISO (page 129) | Change the ISO sensitivity | |
setting | ||
| ||
|
| |
Select the | ||
|
|
1.In the REC mode, press [MENU].
2.On the “REC” tab, select “L/R Key”, and then press [X].
3.Use [S] and [T] to select the function you want to assign and then press [SET].
After you assign a function, you can control its setting using the [W] and [X] keys.
Selecting “Off” leaves the [W] and [X] keys with no function assigned.
138
ADVANCED SETTINGS