■Printing on a Printer that Supports PictBridge or USB DIRECT-PRINT

You can connect the camera directly to a PictBridge or USB DIRECT-PRINT compliant printer and print images without going through a computer.

•The camera also allows easy connection to a printer. Before connecting to a printer, be sure to perform the following procedure first.

1.Press [MENU].

2.On the “Set Up” tab, select “USB” and then press [X].

3.Use [S] and [T] to select the setting that suits your printer and then press [SET].

For this type of printer:

Select this setting:

USB DIRECT-PRINT compatible

Mass Storage

 

 

PictBridge compatible

PTP

 

 

4.Check the battery level indicator to make sure that the battery is fully charged, and then turn off the camera.

•If battery power is low, replace the battery.

•The camera does not draw power over the USB cable.

5.Use the USB cable that comes with the camera to connect the camera to a printer.

USB Cable

USB/AV connector

 

USB

USB Port

Making sure that the T mark on the camera is aligned with the S mark of the USB cable plug, connect the cable to the camera.

203

PRINTING