Viewing Snapshots and Movies on a TV Screen
1.Use the optionally available AV cable
•For details about connecting to the camera and precautions when connecting, see page 17.
AV cable | Yellow | White | Red |
| Video | Audio | TV |
|
| AUDIO IN jack (red) | |
|
| AUDIO IN jack (white) | |
| VIDEO IN jack (yellow) |
| |
•Make sure that the camera is turned off before plugging in or unplugging the cable. Check the user documentation that comes with the TV for information about requirements before plugging into or unplugging from the TV.
2.Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is connected.
3.Turn on the camera and press [p] (PLAY).
This will cause an image to appear on the TV screen, without anything appearing on the camera’s monitor screen.
•You also can change the aspect ratio of the screen and the video output system (page 164).
4.Now you can display images and play back movies as you normally do.
IMPORTANT!
•Audio is initially output by the camera at maximum volume. When you first start displaying images, set the TV volume control at a relatively low level and then adjust it as required.
117 | Viewing Snapshots and Movies |
|