Creating and Using Your Own Setups (CUSTOM SHOT)

You can register up to 999 setups, based on snapshots shot with the camera, as “CUSTOM SHOT” scenes. Selecting a registered “CUSTOM SHOT” scene configures the camera with its settings. The setups of snapshots recorded with the following modes and features can be registered as CUSTOM SHOT scenes.

•Program Auto

•A Mode

•S Mode

•M Mode

•BEST SHOT (Excluding “Prerecord (Movie)”, “For YouTube”, and “HDMI TV Output”)

.To register a CUSTOM SHOT scene

1.On the BEST SHOT scene menu, select the scene named “CUSTOM SHOT (Register User Scene)” and then press [SET].

2.Use [4] and [6] to select the snapshot whose setup you want to save.

3.Use [8] and [2] to select “Save”, and then press [SET].

Your scene will be assigned the name “Custom Scene”, along with a scene number.

NOTE

•A movie setup cannot be registered as a CUSTOM SHOT scene.

•You can check the settings of the currently selected CUSTOM SHOT scene by displaying the camera’s setting menus and looking at its settings.

•CUSTOM SHOT scenes are assigned numbers in the sequence: U1, U2, and so on.

•The following are the settings that are saved for each CUSTOM SHOT scene. Face Detection, Focus, EV Shift, White Balance, Flash, ISO, Metering, Lighting, Flash Intensity, Sharpness, Saturation, Contrast

•CUSTOM SHOT scenes are stored in built-in memory (page 153) in the SCENE folder (snapshots).

•Formatting the camera’s built-in memory (page 165) deletes all user CUSTOM SHOT scenes.

•Use the following procedure when you want to delete a CUSTOM SHOT scene.

1Display the information screen (page 75) of the user BEST SHOT scene you want to delete.

2Press [2] ( ), select “Clear”, and then press [SET].

76

Using BEST SHOT