Shooting without Disturbing Others (Silent Mode)

The Silent mode automatically disables flash, mutes operation tones, and configures other settings to avoid disturbing others around you. It comes in handy when shooting in a museum or other areas where flash photograph is prohibited.

1.In the REC mode, press [SET].

2.Use [8] and [2] to select the sixth Control Panel option from the top (Silent Mode).

3.Use [4] and [6] to select “On” and then press [SET].

This enters the Silent mode, which is indicated by m (Silent) on the monitor screen. The following shows the camera setup in the Silent mode.

FlashOff

Self-timer Off

Sounds Off

•As shown in the example to the right, Flash and Self-timer are not included in the control panel. This means that these settings cannot be changed from the Control Panel.

•See the following for details.

–Flash (page 38)

–Self-timer (page 40)

–Sounds (page 103)

•Entering the Silent mode in the REC mode will also enter the Silent mode in the PLAY mode automatically (page 73).

Using the easy Mode (easy Mode)

The easy mode eliminates troublesome setups and simplifies snapshot recording. This mode is recommended for those who are new to digital imaging.

1.In the REC mode, press [SET].

2.Use [8] and [2] to select the third option from the bottom in the

Control Panel (easy Mode).

3.Use [4] and [6] to select “ON” and then press [SET]. This enters the easy mode.

42

Snapshot Tutorial