![](/images/backgrounds/199512/199512-17123x1.png)
Snapshot Tutorial
Using the Control Panel
The Control Panel can be used to configure camera settings.
1.In the REC mode, press [SET].
This will select one of the Control Panel icons and display its settings.
Control Panel
| 1 |
| 2 |
| 3 |
| 4 |
| 5 |
| 6 |
| 7 |
[SET] | 8 |
| 9 |
2.Use [8] and [2] to select the setting you want to change.
1Image size/Quality* (pages 24, 73) | 5Face recognition (page 32) |
2Flash mode (page 26) | 6Continuous shutter (page 38) |
3Auto Shutter (page 28) | 7ISO sensitivity (page 40) |
4Auto Shutter trigger sensitivity | 8EV shift (page 41) |
(page 30) | 9Date/Time (page 42) |
*Image quality cannot be changed using the Control Panel.
3.Use [4] and [6] to change the setting.
4.If you want to configure another setting, repeat steps 2 and 3.
5.After all of the settings are the way you want, press [SET]. This will apply the settings and return to the REC mode.
NOTE
•You can configure the camera to turn off display of the Control Panel when you press [SET] (page 126).
•You also can configure settings other than those listed above (page 59).
•The Control Panel cannot be displayed while a Prerecord Movie, For YouTube, or Voice Recording Operation is in progress.
23 | Snapshot Tutorial |
|