1.Use [8] and [2] to select the editing method you want to use and then press [SET].

2.Use the following operations to select the frame (point) from which or to which you want to cut the movie (the cut point).

Fast forward/fast reverse

[4] [6]

 

 

Play/pause

[SET]

 

 

 

 

One frame forward/back

[4] [6]

 

 

Cut range (red)

 

 

 

 

3.When the frame where you want the cut point to be is displayed, press [2].

 

}

Cut

While the frame you want the cut to be up to is

 

(To-Point Cut)

displayed, press [2].

 

 

Cut

1While the frame you want the first (From) cut to be is

 

~

displayed, press [2].

 

(Point-To-Point Cut)

2While the frame you want the second (To) cut to be

 

 

 

is displayed, press [2].

 

 

Cut

While the frame you want the cut to be from is

¡

 

(From-Point Cut)

displayed, press [2].

 

 

 

 

4.Use [8] and [2] to select “Yes” and then press [SET].

The selected cut operation will take considerable time to complete. Don’t try to perform any camera operation until the “Busy... Please wait...” message disappears from the monitor screen. Note that a cut operation can take a long time if the movie being edited is long.

90Other Playback Functions (PLAY)