OTHER SETTINGS

To set the volume level

Specifying an Image for the Startup Screen

1. In the REC mode or the PLAY mode, press

You can specify an image you recorded as the startup

screen image, which causes it to appear on the monitor

[MENU].

screen for about two seconds whenever you press the

2. Select the “Set Up” tab, select “Sounds”, and

power button or [ ] (REC) to turn on the camera. The

startup screen image does not appear if you press [ ]

then press [].

(PLAY) to turn on the camera.

3.Use [] and][ to select“Volume”.

1. In the REC mode or the PLAY mode, press

 

4.Use [] and][ to specify the volume setting[MENU]. you want, and then press [SET].

2.Select the “Set Up” tab, select “Startup”, and

• You can set the volume in the range of 0 (no sound)

then press [].

 

 

to 7 (loudest).

 

 

 

 

 

 

 

3.Use [] and][ to display the image yo

NOTE

to use as the startup image.

• The initial default volume setting is 3.

4.Use [] and][ to change the setting,

 

 

then press [SET].

 

 

 

 

 

 

 

 

 

To do this:

Select this setting:

 

 

 

 

 

 

 

 

Use the currently displayed image

On

 

 

 

as the startup screen image

 

 

 

 

 

 

 

 

 

 

 

 

Disable the startup screen

Off

 

 

 

 

 

 

122