To insert a character or function into a calculation: Use d and e to move the cursor to the location where you want to insert the character or function and then input it. Be sure always to use the insert mode if Linear Display is selected.
To clear all of the calculation you are inputting: Press A.
Recurring Decimal Calculations 
Your calculator uses a recurring decimal when you input a value. Calculation results also can be displayed using recurring decimal form whenever applicable.
Inputting a Recurring Decimal
When inputting a recurrent decimal, press a!( k) before inputting its period (repetend) and then input the period up to the ending value. To input the recurring decimal 0.909090.... (0.90), perform the following operation:
“0 .a!( k) 90”.
Important: • If the value starts with an integer part (like: 12.3123123...), do not include the integer part when inputting the period (12.312). • Recurring decimal input is possible only when Natural Display is selected.
To input 0.33333... (0.3) B
Math
0 .
Math
a!( k)
Math
3
To input 1.428571428571... (1.428571) B
Math
1 .a!( k)
Math
428571
To calculate 1.021 + 2.312 B
Math 
1 .a!( k) 021e+ 2 .a!( k) 312=
Calculation result displayed as recurring |
|
decimal value: | f |
Math 