kDecimal Point and Separator Symbols

You can use the display setup (Disp) screen to specify the symbols you want for the decimal point and 3-digit sepa- rator.

•To change the decimal point and separator symbol set- ting, press the Fkey a number of times until you reach the setup screen shown below.

D i s p

1

• Display the selection screen.

fx-95MS: 1r

Other Models: 1r r

•Press the number key (1 or 2) that corresponds to the setting you want to use.

1(Dot): Period decimal point, comma separator

2(Comma): Comma decimal point, period separator

kInitializing the Calculator

•Perform the following key operation when you want to initialize the calculation mode and setup, and clear re- play memory and variables.

AB3(All) =

Basic Calculations

COMP

kArithmetic Calculations

Use the F key to enter the COMP Mode when you want to perform basic calculations.

COMP .............................................................

F 1

•Negative values inside of calculations must be enclosed within parentheses.

sin –1.23 → S RD 1.23 T

11