kMaking Corrections During Input

•Use e and r to move the cursor to the location you want.

•Press [to delete the number or function at the current cursor position.

•Press AKto change to an insert cursor t. Inputting something while the insert cursor is on the display in- serts the input at the insert cursor position.

•Pressing AK, or =returns to the normal cursor from the insert cursor.

kReplay Function

•Every time you perform a calculation, the replay function stores the calculation formula and its result in replay memory. Pressing the [key displays the formula and result of the calculation you last performed. Pressing [ again back steps sequentially (new-to-old) through past calculations.

•Pressing the e or r key while a replay memory cal- culation is on the display changes to the editing screen.

•Pressing the e or r key immediately after you finish a calculation displays the editing screen for that calcula- tion.

•Pressing t does not clear replay memory, so you can recall the last calculation even after you press t.

•Replay memory capacity is 128 bytes for storage of both expressions and results.

•Replay memory is cleared by any of the following ac- tions.

When you press the 5 key

When you initialize modes and settings by pressing A B2(or 3) =.

When you change from one calculation mode to another When you turn off the calculator.

kError Locator

•Pressing r or e after an error occurs displays the calculation with the cursor positioned at the location where the error occurred.

9