
•Always start data input with AB1(Scl) =to clear statistical memory.
•Input data using the key sequence shown below.
•The values produced by a regression calculation depend on the values input, and results can be recalled using the key operations shown in the table below.
To recall this type of value: | Perform this key operation: |
Σx2 | AU1 |
Σx | AU2 |
n | AU3 |
Σy2 | AUr 1 |
Σy | AUr 2 |
Σxy | AUr 3 |
o | AX1 |
xσn | AX2 |
AX3 | |
p | AXr 1 |
yσn | AXr 2 |
AXr 3 | |
Regression coefficient A | AXr r1 |
Regression coefficient B | AXr r2 |
|
|
Regression calculation other than quadratic regression
Correlation coefficient r | AXr r3 |
m | AXr rr 1 |
n | AXr rr 2 |
|
|
•The following table shows the key operations you should use to recall results in the case of quadratic regression.
To recall this type of value: | Perform this key operation: |
Σx3 | AUr r1 |
Σx2y | AUr r2 |
Σx4 | AUr r3 |
Regression coefficient C | AXr r3 |
m1 | AXr rr 1 |
m2 | AXr rr 2 |
n | AXr rr 3 |
|
|
29