Creating aNumber Table from TwoFunctions(TABLE)

TABLE generates a number table based on one or two functions. You can use the function f(x) or the two functions f(x) and g(x). See “Configuring the Calculator Setup” for more information.

Perform the following steps to generate a number table.

1. Press N3(TABLE) to enter the TABLE Mode.

2. Use the X variable to input two functions, one in the format f(x) and the other in the format g(x).

•Be sure to input the X variable (S)(X)) when generating a number table. Any variable other than X is handled as a constant.

•If you are using a single function, input a function in the format f(x) only.

•Pol and Rec cannot be input in the function.

3. In response to the prompts that appear, input the values you want to use, pressing = after each one.

For this prompt:

Input this:

 

 

Start?

Input the lower limit of X (Default = 1).

 

 

End?

Input the upper limit of X (Default = 5).

 

Note: Make sure that the End value is always

 

greater than the Start value.

 

 

Step?

Input the increment step (Default = 1).

 

Note: The Step specifies by how much the Start

 

value should be sequentially incremented as the

 

number table is generated. If you specify Start = 1

 

and Step = 1, X sequentially will be assigned the

 

values 1, 2, 3, 4, and so on to generate the number

 

table until the End value is reached.

•Inputting the Step value and pressing = generates and displays the number table in accordance with the parameters you specified.

•Pressing A while the number table screen is displayed will return to the function input screen in step 2.

To generate a number table for the functions f(x) = x2 +

1

and

2

 

1

 

 

 

g(x) = x2 −

for the range –1  x  1, incremented in steps of 0.5

 

2

 

 

 

 

B

 

 

 

 

 

 

N3(TABLE)

 

 

 

1N(SETUP)c4(TABLE)2(f(x),g(x))

 

 

 

 

 

 

 

 

 

 

 

S)(X)x+1 '2

 

 

 

 

 

 

 

 

 

 

=

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•Pressing = without inputting anything for g(x) will generate a number table based on f(x) only.

S)(X)x-1 '2

Math

=-1 =1 =0.5 =

E-25