Note: • The maximum number of rows in the generated number table depends on the setup menu table setting. Up to 30 rows are supported for the “f(x)” setting, while 20 rows are supported for the “f(x),g(x)” setting. • You can use the number table screen for viewing values only. Table contents cannot be edited. • The number table generation operation causes the contents of variable X to be changed.
Important: The function you input for number table generation is deleted whenever you display the setup menu in the TABLE Mode and switch between Natural Display and Linear Display.
Calculation
Ranges,
Number
of
Digits,
and Precision 
The calculation range, number of digits used for internal calculation, and calculation precision depend on the type of calculation you are performing.
Calculation Range and Precision
Calculation Range | ±1 ⋅ | |
Number of Digits for Internal | 15 digits | |
Calculation | ||
| ||
Precision | In general, ±1 at the 10th digit for a single | |
| calculation. Precision for exponential | |
| display is ±1 at the least significant digit. | |
| Errors are cumulative in the case of | |
| consecutive calculations. |
Function Calculation Input Ranges and Precision
Functions |
|
| Input Range | |
|
|
| ||
| DEG | 0 x 9 ⋅ 109 | ||
|
|
| ||
sinx/cosx | RAD | 0 x 157079632.7 | ||
| GRA | 0 x 1 ⋅ 1010 | ||
|
|
| ||
| DEG | Same as sinx, except when x= | ||
|
|
| ||
tanx | RAD | Same as sinx, except when x= | ||
| GRA | Same as sinx, except when x= | ||
|
|
|
| |
0 | x 1 | |||
0 | x 9.999999999 ⋅ 1099 | |||
sinhx | 0 | x 230.2585092 | ||
coshx | ||||
|
|
| ||
0 | x 4.999999999 ⋅ 1099 | |||
1 | x 4.999999999 ⋅ 1099 | |||
tanhx | 0 | x 9.999999999 ⋅ 1099 | ||
|
|
| ||
0 | x 9.999999999 ⋅ | |||
logx/lnx | 0 | x 9.999999999 ⋅ 1099 | ||
10x | ||||
ex | ||||
'x | 0 | x 1 ⋅ 10100 | ||
|
|
|
| |