k Solution Display
After inputting and registering values on the coefficient editor screen, press =to display the solution(s) for the equation.
•Each press of =displays the next solution, if there is one. Pressing =while the final solution is displayed returns to the coefficient editor screen.
•In the case of simultaneous linear equations, you can use f and c to switch the display between the solutions for X and Y (and Z).
•When there are multiple solutions for a quadratic or cubic equation, you can use the fand ckeys to scroll the display between X1, X2, and X3. The actual number of solutions depends on the equation.
•Pressing Awhile a solution is displayed will return to the coefficient editor screen.
•The display format of solutions is in accordance with the input/ output format and complex number display format settings of the calculator’s setup screen.
•Note that you cannot transform values to engineering notation while an equation solution is displayed.
Appendix Equation Calculation: <#066> to <#070>
Generating a Number Table
from a Function | (TABLE) |
All calculations in this section are performed in the TABLE Mode (N4).
k Configuring a Number Table Generation
Function
The procedure below configures the number table generation function with the following settings.
Function: f(x) = x2 + 1 2
Start Value: 1, End Value: 5, Step Value: 1
LINE
(1)Press N4(TABLE).
(2)Input the function.