Precautions Concerning Sample Data Storage

Sample data you input is deleted automatically whenever you change to another mode from the STAT Mode or change the Statistical Display setting (which causes the FREQ column to be shown or hidden) on the calculator’s setup screen.

Editing Sample Data

Replacing the Data in a Cell

(1)On the STAT editor screen, move the cursor to the cell you want to edit.

(2)Input the new data value or expression, and then press =.

Important!

•Note that you must totally replace the existing data of the cell with new input. You cannot edit parts of the existing data.

Deleting a Line

(1)On the STAT editor screen, move the cursor to the line you want to delete.

(2)Press Y.

Inserting a Line

(1)On the STAT editor screen, move the cursor to the line that will be under the line you will insert.

(2)Press 11(STAT)3(Edit).

(3)Press 1(Ins).

Important!

•Note that the insert operation will not work if the maximum number of lines allowed for the STAT editor screen are already used.

Deleting All STAT Editor Contents

(1)Press 11(STAT)3(Edit).

(2)Press 2(Del-A).

• This clears all of the sample data on the STAT editor screen.

Note

•Note that you can perform the procedures under “Inserting a Line” and “Deleting All STAT Editor Contents” only when the STAT editor screen is on the display.

kSTAT Calculation Screen

The STAT calculation screen is for performing statistical calculations with the data you input with the STAT editor screen. Pressing the Akey while the STAT editor screen is displayed switches to the STAT calculation screen.

The STAT calculation screen also uses Linear format, regardless of the current input/output format setting on the calculator’s setup screen.

E-46