Generating a Number Table

from a Function

(TABLE)

All calculations in this section are performed in the TABLE Mode (N7).

kConfiguring a Number Table Generation

Function

The procedure below configures the number table generation function with the following settings.

Function: f(x) = x2 + 1 2

Start Value: 1, End Value: 5, Step Value: 1

LINE

(1)Press N7(TABLE).

(2)Input the function.

(3)After making sure the function is the way you want, press =.

• This displays the start value input screen.

Indicates the initial default start value of 1.

•If the initial value is not 1, press 1to specify the initial start value for this example.

(4)After specifying the start value, press =.

•This displays the end value input screen.

Indicates the initial default end value of 5.

• Specify the end value.

E-60