
•Press the number key (1 or 2) that corresponds to the setting you want to use.
1(Dot): Period decimal point, comma separator
2(Comma): Comma decimal point, period separator
kInitializing the Calculator
•Perform the following key operation when you want to initialize the calculation mode and setup, and clear re- play memory and variables.
AB3(All) =
Basic Calculations | COMP |
kArithmetic Calculations
Use the F key to enter the COMP Mode when you want to perform basic calculations.
COMP ............................................................. | F1 |
•Negative values inside of calculations must be enclosed within parentheses.
sin
•It is not necessary to enclose a negative exponent within parentheses.
sin 2.34
•Example 1: 3(510–9) 1.510–8
3 - 5 e D9 =
• Example 2: 5(97) 80 5 - R9 + 7 T=
• You can skip all T operations before =.
kFraction Operations
uFraction Calculations
•Values are displayed in decimal format automatically whenever the total number of digits of a fractional value (integer + numerator + denominator + separator marks) exceeds 10.