
StatisticalSD
Calculations REG
| Standard Deviation | SD | 
| 
 | 
Use the Fkey to enter the SD Mode when you want to perform statistical calculations using standard de- viation.
| SD ................................................................... | F2 | 
•Always start data input with AB1(Scl) =to clear statistical memory.
•Input data using the key sequence shown below. <x-data>  S
•Input data is used to calculate values for n, Σx, Σx2, o, σn and 
| To recall this type of value: | Perform this key operation: | 
| Σx2 | AU1 | 
| Σx | AU2 | 
| n | AU3 | 
| o | AX1 | 
| σn | AX2 | 
| 
 | AX3 | 
•Example: To calculate σn1, σn, o, n, Σx, and Σx2 for
the following data : 55, 54, 51, 55, 53, 53, 54, 52
In the SD Mode:
AB 1(Scl) = (Stat clear)
| 55 S | n = SD | 1. | 
Each time you press Sto register your input, the number of data input up to that point is indicated on the display (n value).
54 S51 S55 S
53 SS54 S52 S
| Sample Standard Deviation (σn1) = 1.407885953 | AX3= | 
| Population Standard Deviation (σn) = 1.316956719 | AX2= |