Casio GV-20 Water Resistance and Dust Resistance

INTRODUCTION

•EPSON PRINT Image Matching

This product supports PRINT Image Matching. Combina- tion of use PRINT Image Matching and PRINT Image Matching 2 enabled digital still cameras, printers and soft- ware help photographers to produce images which are more faithful to their intentions.

•Bundled with Photo Loader 2 and Photohands

Your camera comes bundled with the latest version of Photo Loader, the popular application that automatically loads images from your camera to your PC. Photo Loader includes a feature that automatically attaches images to e- mail messages. Also bundled with the camera is Photohands, an application that makes image retouching quick and easy.

Water Resistance and Dust Resistance

The camera is designed to conform to the following water resistance and dust resistance standard. However, performance is not guaranteed under the conditions described be- low.

IEC 60529

[Degrees of protection provided by enclosures (IP Code)] IP66/IP67

Water Resistance

•Water shall not enter the enclosure when it is immersed in a container of standard temperature still tap water to a depth of 1 meter (3.3´) for approximately 30 minutes (im- mersion resistant).

•Direct jetting water from any direction shall not enter the enclosure.

Dust Resistance

•Particles with a diameter of 75∝ m or less shall not enter the enclosure.

12

Contents

User’s Guide Unpacking Contents 45 RECORDING IMAGES PLAYBACK DELETING IMAGES MANAGING IMAGES 71 OTHER SETTINGS 82 REFERENCE 73CONNECTING TO EXTERNAL EQUIPMENT Quick Reference Getting Ready Recording an Image (page 45) Press the shutter release button Move the POWER ON/OFF switch to ON Playback (page 60) Use [+] (forward) and Align the dial with (play mode) Deleting Images (page 64) Press WB Press the shutter the image Check to make sure you really want to delete the currently displayed image IMPORTANT Features Water Resistance and Dust Resistance Operating Environment This is not an underwater camera Operating Precautions Wipe the camera dry after it becomes wet Location Precautions Page Inspecting the Cover O-rings If you find dirt on an O-ring Before putting your camera away after using it 1.Immerse the camera in water and wash it 2.Wipe the camera dry Precautions Data Error Precautions Operating conditions Condensation About the camera’s backlight… Lens Precautions Declaration of Conformity General Guide [+] / [–]buttons Shutter release button Flash Exposure sensor (Flash/Nine Image) button Operation lamp Viewfinder Monitor screen USB port Tripod screw hole DC IN 6V terminal Opening and Closing the Terminal Cover Terminal Monitor Screen Indicators ●Recording Modes ●Play Mode ●SET UP Mode Indicator Lamps Using the Bundled Accessories ■Using the Strap Attaching the Lens Cap Power Requirements 5. Check to make sure the O-ringand contact surface of the battery com partment is not ●Battery Life Guidelines ●Tips for Prolonging Battery Life ●Alkaline Battery Life ●About rechargeable batteries Battery Handling Precautions Low Battery Indicator Using AC Power 2.Move the terminal cover release to theposi- tion and then open the cover 3.Plug the AC adaptor to the DC IN 6V terminal ■AC Adaptor precautions Turning the Camera On and Off Power Save Settings Memory Cards Removing a Memory Card from the Camera 5.Press the card eject button as far as it will go 6.Remove the memory card from the camera 7.Securely close the battery cover and rotate the battery cover knob to theposition to secure it in place Formatting a Memory Card 1.Turn on the camera, and then align the dial with SET UP Use [+] and 3.Use [+] and [–]to select “FORMAT” and then press the shutter release button 4.Use [+] and [–]to select “YES” and then press the shutter release button Setting the Current Date and Time Setting the Date and Time Setting the Date and Time Selecting the Date Format