Manuals / Brands / Photography / Digital Camera / Casio / Photography / Digital Camera

Casio GV-20 Memory Cards, the camera, wipe any sand or, moisture from the, 3.Rotate the battery, 1. Before opening the, camera to ensure that, none of it gets inside

1 44

Download 44 pages, 741.69 Kb

GETTING ACQUAINTED

Memory Cards

This camera supports use of a CompactFlash memory card (CF TYPE I) for image storage.

IMPORTANT!

•Note that this camera does not support use of a Microdrive for image data storage.

•Make sure that the power of the camera is turned off before you insert or remove a memory card.

•When inserting a memory card into the camera, make sure that the card is oriented correctly. Make sure that the correct side of the card is facing up, and that you insert the correct end of the card into the camera.

Inserting a Memory Card into the Camera

1. Before opening the	Battery cover knob
battery cover, carefully
wipe any sand or	3
moisture from the	3
camera to ensure that
none of it gets inside
the camera.	2
2. Slide the battery cover
release in the direction	Battery cover
indicated by the arrow.	Battery cover release
	Battery cover release

3.Rotate the battery

cover knob to the setting, and then open the cover.

Contents

User’s Guide Unpacking Contents 45 RECORDING IMAGES PLAYBACK DELETING IMAGES MANAGING IMAGES 71 OTHER SETTINGS 82 REFERENCE 73CONNECTING TO EXTERNAL EQUIPMENT Quick Reference Getting Ready Recording an Image (page 45) Press the shutter release button Move the POWER ON/OFF switch to ON Playback (page 60) Use [+] (forward) and Align the dial with (play mode) Deleting Images (page 64) Press WB Press the shutter the image Check to make sure you really want to delete the currently displayed image IMPORTANT Features Water Resistance and Dust Resistance Operating Environment This is not an underwater camera Operating Precautions Wipe the camera dry after it becomes wet Location Precautions Page Inspecting the Cover O-rings If you find dirt on an O-ring Before putting your camera away after using it 1.Immerse the camera in water and wash it 2.Wipe the camera dry Precautions Data Error Precautions Operating conditions Condensation About the camera’s backlight… Lens Precautions Declaration of Conformity General Guide [+] / [–]buttons Shutter release button Flash Exposure sensor (Flash/Nine Image) button Operation lamp Viewfinder Monitor screen USB port Tripod screw hole DC IN 6V terminal Opening and Closing the Terminal Cover Terminal Monitor Screen Indicators ●Recording Modes ●Play Mode ●SET UP Mode Indicator Lamps Using the Bundled Accessories ■Using the Strap Attaching the Lens Cap Power Requirements 5. Check to make sure the O-ringand contact surface of the battery com partment is not ●Battery Life Guidelines ●Tips for Prolonging Battery Life ●Alkaline Battery Life ●About rechargeable batteries Battery Handling Precautions Low Battery Indicator Using AC Power 2.Move the terminal cover release to theposi- tion and then open the cover 3.Plug the AC adaptor to the DC IN 6V terminal ■AC Adaptor precautions Turning the Camera On and Off Power Save Settings Memory Cards Removing a Memory Card from the Camera 5.Press the card eject button as far as it will go 6.Remove the memory card from the camera 7.Securely close the battery cover and rotate the battery cover knob to theposition to secure it in place Formatting a Memory Card 1.Turn on the camera, and then align the dial with SET UP Use [+] and 3.Use [+] and [–]to select “FORMAT” and then press the shutter release button 4.Use [+] and [–]to select “YES” and then press the shutter release button Setting the Current Date and Time Setting the Date and Time Setting the Date and Time Selecting the Date Format

Memory Cards

Inserting a Memory Card into the Camera

1. Before opening the

battery cover, carefully

wipe any sand or

moisture from the

camera to ensure that

none of it gets inside

the camera.

2. Slide the battery cover

release in the direction

indicated by the arrow.

3.Rotate the battery

cover knob to the setting, and then open the cover.