E-24
Attaching the Neck Strap
The neck strap can be used to prevent the Handheld Terminal from dropping when
carrying it around. Since there are two strap holes where the neck strap can be attached,
use the hole that affords the greatest ease of use. Attach the neck strap according to the
procedure described below.
To attach the neck strap
1.Pass the thin cord of the neck strap through the neck strap hole on the back of the
Handheld Terminal.
2.Pass the other end of the strap (the part you put around your neck) through the loop
formed by the thin cord.
Important!
Do not swing the Handheld Terminal around holding the neck strap.
IT600_E_P14_39.p65 05.10.25, 9:50 AM24