1

Terminal Detect

This switch detects when the IT-9000 is mounted correctly on the

 

Switch

Ethernet Cradle.

 

 

 

2

Mount Hooks

These hooks are used to stabilize the IT-9000 when mounting it

 

 

on the cradle.

3

Removal Buttons

Press when removing the IT-9000.

 

 

 

4

Power Supply/Data

Power is supplied to the IT-9000 via these contacts. Also used for

 

Communication

data communication.

 

Terminals

 

5

Power Indicator

This LED indicates the power status and the mounting status of

 

LED

the IT-9000.

 

 

Red: Power on, IT-9000 is not installed.

 

 

Green: Power on, IT-9000 mounted correctly.

6

Power Switch

Turns the power on and off.

 

 

 

7

USB Client Port

This port is used to transmit system data and file data (download,

 

 

upload) by connecting the Ethernet Cradle to a PC using a USB

 

 

cable (DT-380USB-A). The dedicated driver must be installed in

 

 

the PC before connecting the Ethernet Cradle to the PC.

8

USB Host Port

This port is used to connect a corresponding USB peripheral

 

 

device.

9

LAN Port

This port is used for connecting the cradle to a PC or hub via a

 

 

LAN cable so that system data and file data can be transmitted

 

 

(uploaded or downloaded).

 

 

The special driver software must be installed in the IT-9000.

10

LAN Connection

This LED shows the status of the LAN connection.

 

Status LED

Off: LAN cable not connected correctly.

 

 

Lit orange: LAN cable connected correctly.

11

LAN

This LED shows the LAN operation status.

 

Communication

Off: No communication.

 

Status LED

Blinking: Communication in progress.

12

Selector Switch

This switch is used to switch between a USB connection and a

 

 

LAN connection.

 

 

LAN: LAN

 

 

A: USB host

 

 

B: USB client

13

AC Adaptor Jack

Connect the AC adaptor (sold separately) here.

E-64